YoraHome CNC Laser Engraving Machine 6550-Pro (All-In-One System)

The YoraHome 6550-Pro

The YoraHome CNC Laser Engraving Machine 6550-Pro is the best professional DIY laser engraver for hobbyists, makers, designers, artists, woodworkers, and professionals.

Built with new and more advanced features than our very popular 6550, you will be impressed by its mighty laser power, excellent safety and operating features, and the awesome designs you'll be able to make on wood, leather, slate, tile, glass, and more.

Very Large Working Area

The YoraHome Laser Engraver 6550-Pro offers a working area of 65x50cm (26x20”), making it the ideal CNC laser engraver for everything from home use to a home business.

High Quality Aluminum Structure

Boasting an all-aluminum body with an iced silver frame, the YoraHome CNC Laser Engraving Machine 6550-Pro gives you a premium look and feel for your machine while providing a strong and stable base for your engraving.

Powerful Diode Laser

The YoraHome CNC Laser Engraving Machine 6550-Pro is provided with a new and very powerful diode laser module.

Laser Technology: Compressed Laser Spot

Laser Type: Fixed-Focus

Electrical Power: 80W

Optical Power: 10W

Wavelentgth: 450nm

Voltage : 24V

Current : 2A

Because of the 0.08x0.08mm compressed laser spot, our laser will provide more precise and thinner engraving and cutting lines/trails.

Air Assist System

Air assist means blowing air supplied from an air pump onto the path of the laser using an air tube and nozzle to remove smoke and debris.

It will help to stop burn marks, cut out thin wood in less time, and prolong the lifespan of your laser module.

Safety Protection System

1. Magnet-Attached Laser Shield: In addition to the high-quality laser glasses provided with the machine, there is a laser shield attached to the bottom of the laser to protect your eyes and avoid accidental beam exposure.

2. Exposure Duration Detection And Limitation: If the machine is on but the motors do not operate while the laser beam is on, the laser beam turns off after 10 seconds to prevent any fire.

3. Active Position Protection: If the machine gets bumped or detects unexpected movement, the laser beam turns off immediately.

4. Emergency Stop Button: To turn off the machine immediately.

5. Flame Detection With Alarm:  When turned on as soon as a flame is detected in the work area, the laser beam turns off automatically. An alarm will start ringing to alert you so that you can take appropriate actions. (Turned off by default as it will cause the laser not to work in direct sunlight)

Leg Extension Capability

The YoraHome CNC Laser Engraving Machine 6550-Pro comes with additional heavy-duty leg segments to increase its height and allow you to engrave thicker materials.

Three easy steps:

1. Using the included T-slot nuts, attach one leg segment (50mm) to each frame corner to raise the machine.

2. You can insert the second leg segment for additional height (100mm total).

3. Attach the pads to the bottom of the legs for greater stability.

Excellent Performance

1. Adjustable Z-Axis: To adjust your laser to go up and down. 

2. Dual Y-Axis Motors: For better synchronization and faster movement with reduced wracking.

Tension-Wheel & Synchronous Belt: To eliminate movement gaps, and reduce machine vibrations so that the engraving results remain accurate even at high processing speeds. 

3. Homing Switches: For consistent homing position every time.

4. Scale Rulers on 4 sides: For quick measurement and alignment.

5. Drag Chains on the X and Y axis: For easier cable management. 

6. Laser Height Gauge With Holder: To set the correct distance from the laser lens to the workpiece. Never lose it with the included holder. 

7. Full Metal Body and Feet: For more durability and stability.

8. Unique Rotary Switch: No more plugging and unplugging to swap between your Y-axis and Rotary. 

9. 32-Bits Arduino board loaded with GRBL Firmware: For smooth and lightning-fast engravings. Enhanced grayscale results. Works with LaserGrbl and LightBurn. Enclosed controller box with all ports and control buttons.

Compatible Software

To operate the YoraHome CNC Laser Engraving Machine 6550-Pro, a computer with software that will communicate directly with the control board of the machine is required.

For Windows users, we recommend the LaserGrbl software which is free to use. Mac users must use the LightBurn application (also available to Windows and Linux users), which comes with a 30-day trial and is an inexpensive commercial option.

These easy-to-use software packages will allow you to import your artwork (PNG, JPG, GIF, BMP, etc.), edit it, apply settings like laser power, speed, number of passes, brightness, contrast, and much more.