Overview

You can use each of the Yora Laser Module (3.5W, 5.5W, 15W, 40W) to engrave on paper, wood, textiles, leather or plastics.

For the most versatility, the 15W or 40W laser are the ones to choose.

We provide the Yora laser module with:

+ 2x Laser wires (3018 & 6550)

+ 1x Laser protective glasses and

+ 1x Laser shield for additional protection.

Product Specifications

Wavelength: 450nm

Powers Available: 3.5W, 5.5W, 15W, 40W

Heat dissipation: Fan Operating

Voltage: DC 12V, Working Current: 5A

Focal length: We recommend a distance of approximately 1-3/4” (45mm) for the adjustable 3.5W and 5.5W lasers, and 20mm for the focused 15W and 40W lasers.

Working temperature: 15℃ - 45℃

Compatibility: Yora 3018-Pro, Yora 6550, Yora Draw, Yora SilverBack

Estimated lifetime: 2,000-4,000 hours (under normal use). Laser life is dependent upon operating methods and proper care. Running at full power repeatedly will greatly shorten the life of the laser due to thermal stress on the circuitry. Keeping your laser below 80% power during normal operation has been shown to help prolong the life of the diode. Take advantage of routine cooldown stages during long projects, as this will help prevent overheating. We recommend 15mn cool down every 30mn of laser running. As they are powerful electro-optical devices with a finite life span, laser modules should be considered as a type of "consumable" item requiring occasional replacement.