YoraHome Laser Module Kit

You can use each YoraHome Laser Module (3.5W, 5.5W, 15W, 40W, 80W, 96W) to engrave on paper, wood, textiles, leather, or plastics.

For the most versatility, the 15W, 40W, 80W, and 96W lasers are the ones to select.

All our laser modules come with laser protective glasses and a laser shield for additional protection.

Wavelength: 450nm

Electrical Powers Available: 3.5W, 5.5W, 15W, 40W, 80W, 96W

Heat dissipation: Fan Operating

Voltage: DC 12V, Working Current: 5A

Focal length: We recommend a distance of approximately 1-3/4” (45mm) for the adjustable 3.5W and 5.5W lasers, 20mm for the focused 15W and 40W lasers, and 40mm for the focused 80W and 96W lasers.

Working temperature: 15℃ - 45℃

Estimated lifetime: 2,000-4,000 hours (under normal use). Laser life is dependent upon operating methods and proper care. Running at full power repeatedly will greatly shorten the life of the laser due to thermal stress on the circuitry. Keeping your laser below 80% power during normal operation has been shown to help prolong the life of the diode. Take advantage of routine cooldown stages during long projects, as this will help prevent overheating. We recommend 15mn cool down every 30mn of laser running. As they are powerful electro-optical devices with a finite life span, laser modules should be considered as a type of "consumable" item requiring occasional replacement.

Look at this picture to check which lasers are compatible with which machines. Please get in touch with us at support@yorahome.com for any questions you may have.